+34 972 595 020 | info@bominox.com |
Stainless steel pumps | Bominox | Portfolio Categories Centrifugal pumps
Diseño y fabricación de bombas de acero inoxidable destinadas a la industria alimentaria, enológica, química, cosmética y farmacéutica
152
archive,tax-portfolio_category,term-centrifugal-pumps,term-152,ajax_fade,page_not_loaded,,select-child-theme-ver-1.0.0,select-theme-ver-3.0.2,wpb-js-composer js-comp-ver-4.3.4,vc_responsive
Stainless steel pumps | Bominox / 
13 November, 2014

MULTI-S Sanitary multistage centrifugal pump

  • Multistage centrifugal pump for clear liquids under load and at high pressures
  • Body, diffusers and impellers (closed) produced by microfusion techniques
  • From 2 to 6 stages
  • Single internal mechanical seal
  • Special motor with extended shaft
  • DIN 11851 connections (GAS, CLAMP, IDF, SMS, flanges, etc. optional)
  • Polished external finish, stainless steel motor shroud and adjustable tripod

Technical specifications

Maximum flow
40 m3/h (650 l/min)
Maximum differential head
16 bar (160 mWC)
Power
1.5 – 15 kW (2 – 20 hp)
Temperature
-25 – +130 ºC
Maximum viscosity
300 cP
Rotation speed
2900 rpm (50 Hz)
3450 rpm (60 Hz)
Material
AISI 316 (EN 1.4401)
Applications
Water, wine, brine, soda, acids, solvents, etc.

Downloads

13 November, 2014

MULTI-M Multistage centrifugal pump

  • Multistage centrifugal pump for clear liquids under load and at high pressures
  • Body, diffusers and impellers (closed) produced by microfusion techniques
  • From 2 to 6 stages
  • Single internal mechanical seal
  • Special motor with extended shaft
  • GAS or DIN 11851 connections (CLAMP, IDF, SMS, flanges, etc. optional)
  • Brushed matt finish and stainless steel baseplate

Technical specifications

Maximum flow
40 m3/h (650 l/min)
Maximum differential head
16 bar (160 mWC)
Power
1.5 – 15 kW (2 – 20 hp)
Temperature
-25 – +130 ºC
Maximum viscosity
300 cP
Rotation speed
2900 rpm (50 Hz)
3450 rpm (60 Hz)
Material
AISI 316 (EN 1.4401)
Applications
Water, wine, brine, soda, acids, solvents, etc.

Downloads

13 November, 2014

ELNOX-P Bare shaft centrifugal pump

  • Centrifugal pump for liquids with or without suspended solids under load
  • Bare shaft construction on top of a baseplate, supported by bearings and with a flexible coupling
  • Cold-stamped body, cover and flange
  • Joined together using a quick-release clamp (screwed safety rings are optional for high pressures)
  • High hydraulic output, semi-open impeller produced by microfusion techniques
  • Minimum thickness 3 mm (6 mm in larger sizes)
  • Standard single internal mechanical seal (multiple assemblies available: double counter-pressure seal, tandem, external seal, packed, etc.)
  • DIN 2633 flange connections
  • Brushed matt finish

Technical specifications

Maximum flow
140 m3/h (2300 l/min)
Maximum differential head
8 bar (80 mWC)
Power
0.37 – 22 kW (0.5 – 30 hp)
Temperature
-25 – +180 ºC
Maximum viscosity
500 cP
Rotation speed
1450 – 2900 rpm (50 Hz)
1750 – 3450 rpm (60 Hz)
Material
AISI 316 (EN 1.4401)
Applications
Water, brine, soda, acids, glycols, solvents, plant protection products, fertilisers, residues, etc.

Downloads

13 November, 2014

ELNOX-R/S Bare shaft centrifugal pump

  • Centrifugal pump for liquids with or without suspended solids under load
  • Bare shaft construction on top of a baseplate, supported by bearings and with a flexible coupling
  • Cold-stamped body, cover and flange
  • Joined together using a quick-release clamp (screwed safety rings are optional for high pressures)
  • High hydraulic output, semi-open impeller produced by microfusion techniques
  • Minimum thickness 3 mm (6 mm in larger sizes)
  • Standard single internal mechanical seal (multiple assemblies available: double counter-pressure seal, tandem, external seal, packed, etc.)
  • GAS or DIN 11851 connections (CLAMP, IDF, SMS, etc. optional)
  • Brushed matt (ELNOX-R) or gloss (ELNOX-S) finish

Technical specifications

Maximum flow
140 m3/h (2300 l/min)
Maximum differential head
8 bar (80 mWC)
Power
0.37 – 22 kW (0.5 – 30 hp)
Temperature
-25 – +180 ºC
Maximum viscosity
500 cP
Rotation speed
1450 – 2900 rpm (50 Hz)
1750 – 3450 rpm (60 Hz)
Material
AISI 316 (EN 1.4401)
Applications
Water, brine, soda, acids, glycols, solvents, plant protection products, fertilisers, residues, etc.

Downloads

13 November, 2014

LACTIC Hygienic centrifugal pump

  • Centrifugal pump with EHEDG (European Hygienic Engineering & Design Group) certificate No. 200706
  • This design complies with the strictest of hygiene standards, thanks to the CIP system, the pump does not need to be disassembled for cleaning.
  • Specially designed for dairy, food, cosmetic and pharmaceutical industries
  • The body-flange formed by microfusion and the cold-stamped suction cover are joined together with a quick-release clamp that requires no tools
  • Open impeller produced by microfusion techniques (3 vanes)
  • Surface finish Ra ≤ 0.8 µm
  • Hygienically-designed, single mechanical seal with FDA certified joints
  • DIN 11851, Clamp (ISO 2852) or IDF (ISO 2853) connections
  • Optional inferior drain port
  • Stainless steel motor shroud and adjustable tripod

Technical specifications

Maximum flow
140 m3/h (2300 l/min)
Maximum differential head
7.5 bar (75 mWC)
Power
0.37 – 22 kW (0.5 – 30 hp)
Temperature
-25 – +130 ºC
Maximum viscositya
500 cP
Rotation speed
1450 – 2900 rpm (50 Hz)
1750 – 3450 rpm (60 Hz)
Material
AISI 316 (EN 1.4401)
Applications
Milk, creams, juices, syrups, purified water, cleaning solutions (CIP), etc.

Downloads

13 November, 2014

SANIX-01 Sanitary centrifugal pump

  • Sanitary centrifugal pump for liquids under load
  • Robust design for use with foodstuffs, internally and externally polished finish (widely introduced across the market for 40 years)
  • Cold-stamped body, cover and flange
  • Joined together with a quick-release clamp, requiring no tools, to facilitate rapid cleaning
  • High hydraulic output, semi-open impeller produced by microfusion techniques
  • Minimum thickness 3 mm (6 mm in larger sizes)
  • Standard single internal mechanical seal (multiple assemblies available: double counter-pressure seal, tandem, etc.)
  • DIN 11851 connections (GAS, CLAMP, IDF, SMS, flanges, etc. optional)
  • Different options for technical solutions: heated body, inferior drain port, enlarged clamp for high temperatures, special dimensions, etc.
  • Stainless steel motor shroud and adjustable tripod

Technical specifications

Maximum flow
200 m3/h (3300 l/min)
Maximum differential head
8 bar (80 mWC)
Power
0.37 – 22 kW (0.5 – 30 hp)
Temperature
-25 – +180 ºC
Maximum viscosity
500 cP
Rotation speed
1450 – 2900 rpm (50 Hz)
1750 – 3450 rpm (60 Hz)
Material
AISI 316 (EN 1.4401)
Applications
Milk, wine, beer, oils, syrups, juices, brine, acids, cleaning solutions (CIP), etc.

Downloads

13 November, 2014

STAMP-STN/S Stamped centrifugal pump (with motor shroud)

  • Centrifugal pump for solid-free liquids under load
  • Cold-stamped body, cover and flange
  • Joined together with a clamp
  • Semi-open impeller obtained by microfusion
  • Minimum thickness 3 mm
  • Single internal mechanical seal
  • GAS or DIN 11851 connections
  • Brushed matt finish
  • Stainless steel motor shroud and baseplate

Technical specifications

Maximum flow
50 m3/h (800 l/min)
Maximum differential head
4 bar (40 mWC)
Power
0.37 – 4 kW (0.5 – 5.5 hp)
Temperature
-15 – +100 ºC
Maximum viscosity
300 cP
Rotation speed
1450 – 2900 rpm (50 Hz)
1750 – 3450 rpm (60 Hz)
Material
AISI 316 (EN 1.4401)
Applications
Water, wine, beer, brines, etc.

Downloads

13 November, 2014

SIMPLEX-MS Stamped centrifugal pump (with motor shroud)

  • Centrifugal pump for solid-free liquids under load
  • Economical and low-maintenance design
  • All parts stamped: body, cover, flange and impeller are all cold-stamped
  • Minimum thickness 2 mm
  • High hydraulic output: central outlet, side diffuser and an open impeller
  • Attached with screws
  • Single internal mechanical seal
  • GAS or DIN 11851 connections
  • Brushed matt finish
  • Stainless steel motor shroud and baseplate

Technical specifications

Maximum flow
60 m3/h (1000 l/min)
Maximum differential head
6 bar (60 mWC)
Power
0.37 – 7.5 kW (0.5 – 10 hp)
Temperature
-15 – +100 ºC
Maximum viscosity
300 cP
Rotation speed
1450 – 2900 rpm (50 Hz)
1750 – 3450 rpm (60 Hz)
Material
AISI 316 (EN 1.4401)
Applications
Water, wine, beer, brines, etc.

Downloads

13 November, 2014

SOLID-ATEX Centrifugal pump for explosive atmospheres

  • Centrifugal pump with ATEX certificate for explosive atmospheres
  • Technical File Retention Receipt No. LOM 06ATEX0015
  • Zone 1 or 2 (Category 2 or 3)
  • Temperature class T3, T4 or T5
  • Very solid design to ensure maximum safety and durability
  • The body-flange formed by microfusion and the cold-stamped suction cover are joined with screws
  • High hydraulic output, semi-open impeller produced by microfusion techniques
  • Flameproof motor II 2G Exd IIC T5
  • Single or double ATEX certified mechanical seal
  • GAS, DIN 11851 or DIN 2633 flange connections
  • Brushed matt finish and stainless steel baseplate

Technical specifications

Maximum flow
150 m3/h (2500 l/min)
Maximum differential head
9 bar (90 mWC)
Power
0.37 – 22 kW (0.5 – 30 hp)
Temperature
-25 – +150 ºC
Maximum viscosity
500 cP
Rotation speed
1450 – 2900 rpm (50 Hz)
1750 – 3450 rpm (60 Hz)
Material
AISI 316 (EN 1.4401)
Applications
Alcohols, liquors, water, wine, beer, brine, acids, glycols, solvents, hydrocarbons, etc.

Downloads

13 November, 2014

MINOX-01 Monoblock centrifugal pump

  • Centrifugal pump for liquids with or without suspended solids under load
  • High degree of mechanical robustness and chemical resistance (widely introduced across the market for 40 years)
  • Cold-stamped body, cover and flange
  • Joined together using a quick-release clamp (screwed safety rings are optional for high pressures)
  • High hydraulic output, semi-open impeller produced by microfusion techniques
  • Minimum thickness 3 mm (6 mm in larger sizes)
  • Standard single internal mechanical seal (multiple assemblies available: double counter-pressure seal, tandem, external seal, packed, etc.)
  • GAS or DIN 11851 connections (CLAMP, IDF, SMS, flanges, etc. optional)
  • Different options for technical solutions: heated body, inferior drain port, enlarged clamp for high temperatures, special dimensions, etc.
  • Brushed matt finish and stainless steel baseplate

Technical specifications

Maximum flow
200 m3/h (3300 l/min)
Maximum differential head
8 bar (80 mWC)
Power
0.37 – 22 kW (0.5 – 30 hp)
Temperature
-25 – +180 ºC
Maximum viscositya
500 cP
Rotation speed
1450 – 2900 rpm (50 Hz)
1750 – 3450 rpm (60 Hz)
Material
AISI 316 (EN 1.4401)
Applications
Water, wine, beer, oils, brine, soda, acids, glycols, solvents, plant protection products, fertilisers, residues, etc.

Downloads