Stainless steel pumps | Bominox | Portfolio Categories Chemical industry
Diseño y fabricación de bombas de acero inoxidable destinadas a la industria alimentaria, enológica, química, cosmética y farmacéutica
154
archive,tax-portfolio_category,term-chemical-industry,term-154,ajax_fade,page_not_loaded,,select-child-theme-ver-1.0.0,select-theme-ver-3.0.2,wpb-js-composer js-comp-ver-4.3.4,vc_responsive

ROTOR-S Bare shaft helical pump

  • Positive displacement helical pump, self-priming capacity of up to 6 m
  • Bare shaft construction on top of a baseplate, supported by bearings and with a flexible coupling
  • Particularly recommended for viscous or highly-viscous products, but also commonly used for clear and delicate alimentary products
  • White NBR Perbunan stator for foodstuffs (EPDM or Viton optional)
  • Quick and easy disassembly using just two lateral tie rods
  • Reversible
  • Direct-drive motor, geared motor or variable speed motor
  • Single internal mechanical seal
  • DIN 11851 connections (GAS, CLAMP, IDF, SMS, flanges, etc. optional)
  • Different options for technical solutions: heated body, inferior drain port, regulation or safety bypass, two-stage, hopper, etc.
  • Brushed matt finish (polished finish optional)

Technical specifications

Maximum flow
20 m3/h (330 l/min)
Maximum differential head
6 bar (60 mWC)
Power
0.37 – 5.5 kW (0.5 – 7.5 hp)
Temperature
-25 – +150 ºC
Maximum viscosity
100000 cP
Rotation speed
40 a 1450 rpm (50 Hz)
50 a 1750 rpm (60 Hz)
Material
AISI 316 (EN 1.4401)
Applications
Wine, oils, juices, syrups, honey, marmalades, creams, pastes, pâtés, soaps, gels, muds, etc.

Downloads

ROTOR-2/M Two-stage helical pump

  • Positive displacement helical pump, self-priming capacity of up to 6 m
  • Particularly recommended for viscous or highly-viscous products, but also commonly used for clear and delicate alimentary products
  • Two white, NBR Perbunan stators for foodstuffs (EPDM or Viton optional)
  • Quick and easy disassembly using just two lateral tie rods
  • Reversible
  • Direct-drive motor, geared motor or variable speed motor
  • Single internal mechanical seal
  • DIN 11851 connections (GAS, CLAMP, IDF, SMS, flanges, etc. optional)
  • Different options for technical solutions: heated body, inferior drain port, regulation or safety bypass, special dimensions, etc.
  • Brushed matt finish (polished finish optional)

Technical specifications

Maximum flow
20 m3/h (330 l/min)
Maximum differential head
12 bar (120 mWC)
Power
0.55 – 7.5 kW (0.75 – 10 hp)
Temperature
-25 – +150 ºC
Maximum viscosity
100000 cP
Rotation speed
40 a 1450 rpm (50 Hz)
50 a 1750 rpm (60 Hz)
Material
AISI 316 (EN 1.4401)
Applications
Wine, oils, juices, syrups, honey, marmalades, creams, pastes, pâtés, soaps, gels, muds, etc.

Downloads

ROTOR-M Helical pump

  • Positive displacement helical pump, self-priming capacity of up to 6 m
  • Particularly recommended for viscous or highly-viscous products, but also commonly used for clear and delicate alimentary products
  • White NBR Perbunan stator for foodstuffs (EPDM or Viton optional)
  • Quick and easy disassembly using just two lateral tie rods
  • Reversible
  • Direct-drive motor, geared motor or variable speed motor
  • Single internal mechanical seal
  • DIN 11851 connections (GAS, CLAMP, IDF, SMS, flanges, etc. optional)
  • Different options for technical solutions: heated body, inferior drain port, regulation or safety bypass, special dimensions, etc.
  • Brushed matt finish (polished finish optional)

Technical specifications

Maximum flow
20 m3/h (330 l/min)
Maximum differential head
6 bar (60 mWC)
Power
0.37 – 5.5 kW (0.5 – 7.5 hp)
Temperature
-25 – +150 ºC
Maximum viscosity
100000 cP
Rotation speed
40 a 1450 rpm (50 Hz)
50 a 1750 rpm (60 Hz)
Material
AISI 316 (EN 1.4401)
Applications
Wine, oils, juices, syrups, honey, marmalades, creams, pastes, pâtés, soaps, gels, muds, etc.

Downloads

RAPIT-MM Side channel self-priming pump

  • Side channel pump for clear liquids, self-priming up to 5 m
  • Body-flange and impeller produced using microfusion techniques
  • Thanks to its tight fit it has a large negative suction power and can operate with liquids which contain air or gases without losing pumping capacity (e.g., CIP return)
  • Symmetrical design, so it is completely reversible
  • Joined with screws
  • Single internal mechanical seal
  • GAS or DIN 11851 connections (CLAMP, IDF, SMS, flanges, etc. optional)
  • Different options for technical solutions: inferior drain port, special dimensions, etc.
  • Brushed matt finish and stainless steel baseplate

Technical specifications

Maximum flow
50 m3/h (800 l/min)
Maximum differential head
6 bar (60 mWC)
Power
0.75 – 15 kW (1 – 20 hp)
Temperature
-25 – +130 ºC
Maximum viscosity
100 cP
Rotation speed
1450 rpm (50 Hz)
1750 rpm (60 Hz)
Material
AISI 316 (EN 1.4401)
Applications
Water, wine, beer, oils, brine, acids, solvents, cleaning solutions (CIP), etc.

Downloads

CEBAX-M Self-priming pump with self-priming body

  • Centrifugal pump for clear liquids, self-priming up to 3 m
  • Self-priming stamped body (with priming chamber)
  • Specially designed for operating with liquids that contain air or gases and without losing pumping capacity (e.g., CIP return)
  • Joined together with screwed ring
  • High hydraulic output, semi-open impeller produced by microfusion techniques
  • Minimum thickness 3 mm
  • Single internal mechanical seal
  • GAS or DIN 11851 connections (CLAMP, IDF, SMS, flanges, etc. optional)
  • Accessed from above for manual priming, with inferior drain port
  • Brushed matt finish and stainless steel baseplate

Technical specifications

Maximum flow
100 m3/h (1600 l/min)
Maximum differential head
7 bar (70 mWC)
Power
2.2 – 22 kW (3 – 30 hp)
Temperature
-25 – +130 ºC
Maximum viscosity
100 cP
Rotation speed
2900 rpm (50 Hz)
3450 rpm (60 Hz)
Material
AISI 316 (EN 1.4401)
Applications
Water, wine, brine, acids, solvents, cleaning solutions (CIP), etc.

Downloads

MULTI-M Multistage centrifugal pump

  • Multistage centrifugal pump for clear liquids under load and at high pressures
  • Body, diffusers and impellers (closed) produced by microfusion techniques
  • From 2 to 6 stages
  • Single internal mechanical seal
  • Special motor with extended shaft
  • GAS or DIN 11851 connections (CLAMP, IDF, SMS, flanges, etc. optional)
  • Brushed matt finish and stainless steel baseplate

Technical specifications

Maximum flow
40 m3/h (650 l/min)
Maximum differential head
16 bar (160 mWC)
Power
1.5 – 15 kW (2 – 20 hp)
Temperature
-25 – +130 ºC
Maximum viscosity
300 cP
Rotation speed
2900 rpm (50 Hz)
3450 rpm (60 Hz)
Material
AISI 316 (EN 1.4401)
Applications
Water, wine, brine, soda, acids, solvents, etc.

Downloads

ELNOX-P Bare shaft centrifugal pump

  • Centrifugal pump for liquids with or without suspended solids under load
  • Bare shaft construction on top of a baseplate, supported by bearings and with a flexible coupling
  • Cold-stamped body, cover and flange
  • Joined together using a quick-release clamp (screwed safety rings are optional for high pressures)
  • High hydraulic output, semi-open impeller produced by microfusion techniques
  • Minimum thickness 3 mm (6 mm in larger sizes)
  • Standard single internal mechanical seal (multiple assemblies available: double counter-pressure seal, tandem, external seal, packed, etc.)
  • DIN 2633 flange connections
  • Brushed matt finish

Technical specifications

Maximum flow
140 m3/h (2300 l/min)
Maximum differential head
8 bar (80 mWC)
Power
0.37 – 22 kW (0.5 – 30 hp)
Temperature
-25 – +180 ºC
Maximum viscosity
500 cP
Rotation speed
1450 – 2900 rpm (50 Hz)
1750 – 3450 rpm (60 Hz)
Material
AISI 316 (EN 1.4401)
Applications
Water, brine, soda, acids, glycols, solvents, plant protection products, fertilisers, residues, etc.

Downloads

ELNOX-R/S Bare shaft centrifugal pump

  • Centrifugal pump for liquids with or without suspended solids under load
  • Bare shaft construction on top of a baseplate, supported by bearings and with a flexible coupling
  • Cold-stamped body, cover and flange
  • Joined together using a quick-release clamp (screwed safety rings are optional for high pressures)
  • High hydraulic output, semi-open impeller produced by microfusion techniques
  • Minimum thickness 3 mm (6 mm in larger sizes)
  • Standard single internal mechanical seal (multiple assemblies available: double counter-pressure seal, tandem, external seal, packed, etc.)
  • GAS or DIN 11851 connections (CLAMP, IDF, SMS, etc. optional)
  • Brushed matt (ELNOX-R) or gloss (ELNOX-S) finish

Technical specifications

Maximum flow
140 m3/h (2300 l/min)
Maximum differential head
8 bar (80 mWC)
Power
0.37 – 22 kW (0.5 – 30 hp)
Temperature
-25 – +180 ºC
Maximum viscosity
500 cP
Rotation speed
1450 – 2900 rpm (50 Hz)
1750 – 3450 rpm (60 Hz)
Material
AISI 316 (EN 1.4401)
Applications
Water, brine, soda, acids, glycols, solvents, plant protection products, fertilisers, residues, etc.

Downloads

SOLID-ATEX Centrifugal pump for explosive atmospheres

  • Centrifugal pump with ATEX certificate for explosive atmospheres
  • Technical File Retention Receipt No. LOM 06ATEX0015
  • Zone 1 or 2 (Category 2 or 3)
  • Temperature class T3, T4 or T5
  • Very solid design to ensure maximum safety and durability
  • The body-flange formed by microfusion and the cold-stamped suction cover are joined with screws
  • High hydraulic output, semi-open impeller produced by microfusion techniques
  • Flameproof motor II 2G Exd IIC T5
  • Single or double ATEX certified mechanical seal
  • GAS, DIN 11851 or DIN 2633 flange connections
  • Brushed matt finish and stainless steel baseplate

Technical specifications

Maximum flow
150 m3/h (2500 l/min)
Maximum differential head
9 bar (90 mWC)
Power
0.37 – 22 kW (0.5 – 30 hp)
Temperature
-25 – +150 ºC
Maximum viscosity
500 cP
Rotation speed
1450 – 2900 rpm (50 Hz)
1750 – 3450 rpm (60 Hz)
Material
AISI 316 (EN 1.4401)
Applications
Alcohols, liquors, water, wine, beer, brine, acids, glycols, solvents, hydrocarbons, etc.

Downloads

MINOX-01 Monoblock centrifugal pump

  • Centrifugal pump for liquids with or without suspended solids under load
  • High degree of mechanical robustness and chemical resistance (widely introduced across the market for 40 years)
  • Cold-stamped body, cover and flange
  • Joined together using a quick-release clamp (screwed safety rings are optional for high pressures)
  • High hydraulic output, semi-open impeller produced by microfusion techniques
  • Minimum thickness 3 mm (6 mm in larger sizes)
  • Standard single internal mechanical seal (multiple assemblies available: double counter-pressure seal, tandem, external seal, packed, etc.)
  • GAS or DIN 11851 connections (CLAMP, IDF, SMS, flanges, etc. optional)
  • Different options for technical solutions: heated body, inferior drain port, enlarged clamp for high temperatures, special dimensions, etc.
  • Brushed matt finish and stainless steel baseplate

Technical specifications

Maximum flow
200 m3/h (3300 l/min)
Maximum differential head
8 bar (80 mWC)
Power
0.37 – 22 kW (0.5 – 30 hp)
Temperature
-25 – +180 ºC
Maximum viscositya
500 cP
Rotation speed
1450 – 2900 rpm (50 Hz)
1750 – 3450 rpm (60 Hz)
Material
AISI 316 (EN 1.4401)
Applications
Water, wine, beer, oils, brine, soda, acids, glycols, solvents, plant protection products, fertilisers, residues, etc.

Downloads